• Registered: 2012-10-17
  • Posts: 5

Topic: Output Ship Display Drydock 2.0

The ship displays have two tracks for hull,engine, and weapons where there should be only a single track for each item.

  • Registered: 2012-04-21
  • Posts: 99

Re: Output Ship Display Drydock 2.0

On the DISPLAY tab, between the PV of the ship and the yellow box where you can select SHIP1, SHIP2, etc. there is a drop down box with a "1" in it. Click to drop it down, and you'll see at the bottom of the drop down 3 checked boxes, "Select All", "1", "0". Uncheck "0", then select OK. This will remove all the boxes that the sheet doesn't need. This is also the same thing on the DRAKE tab.

Full instructions for Drydock 2.0 can be found on pp 73-76 of the main rulebook (MJG-140 v2.0).

Cheers.